Europäisches Pulse Plating Seminar
European Pulse Plating Seminar

Von den Grundlagen zur großtechnischen Anwendung
From fundamentals to industrial application

Hirtenberger Engineered Surfaces GmbH
Happy Plating

Das Europäische Pulse-Plating Seminar am 07.03.2008 im Parkhotel Schönbrunn / Wien war auch in seinem dritten Jahr ein großer Erfolg. Die etwa 60 Teilnehmer führten in einer zwanglosen Atmosphäre eine offene Diskussion zu Fragen der industriellen Anwendung der Pulsabscheidung. Auch dieses Jahr nahmen Teilnehmer aus zahlreichen europäischen Ländern sowie den USA und Korea teil. Damit hat sich das Interesse am Europäischen Pulse-Plating Seminar auch außerhalb der Grenzen Europas etabliert.

Durch die angeregte Diskussion wurde wie in den vergangenen Jahren der Zeitrahmen überzogen, schließlich wurden die gemeinsamen Gespräche im Anschluss bei einem typischen Wiener Heurigen fortgesetzt.

Den Rahmen der Veranstaltung bildeten 12 internationale Fachvorträge von führenden Experten auf dem Gebiet der Pulsabscheidung:

The European Pulse-Plating Seminar on the 7th March 2008 in the Parkhotel Schönbrunn / Vienna was also in its third year as successful as in the previous years. Approximately 60 participants joined a very open discussion in a very relaxed atmosphere about questions regarding the industrial application of pulse plating. This year again, participants from numerous European countries and also from the USA and Korea attended the seminar. So the European Pulse Plating Seminar is considerably established within and also outside the borders of Europe.

Caused by the exciting discussions, the time frame of the seminar was overrun, so that by common decision the chance was taken to keep on talking in a more informal surrounding at a typical Viennese Heurigen.

12 international presentations of leading experts on pulse plating formed the framework of the conference:

Plenarvorträge / Plenary lectures

Session 1:

  1. Prof. Dr. Pietro CAVALOTTI (Politecnico di Milano, IT)
    Heat treatment of pulse plated amorphous Ni-W alloys to obtain maximum hardness
  2. Dr. Naroa IMAZ (CIDETEC, ES)
    Nanocrystalline copper coatings with high mechanical properties obtained by pulse plating techniques
  3. Dr. Laszlo PETER (Hungarian Academy of Science, HU)
    Depth profile analysis of pulse-plated multilayer films

Session 2:

  1. Dr. Selma HANSAL (Happy Plating, AT)
    Comparison of simulated pulse plating processes with practical experiments
  2. Dr. Peter BRESSERS (TNO Science & Industry, NL)
    Pulse plating of aluminium from ionic liquids
  3. Dr. Matilda ZEMANOVA (Slovak University of Technology Bratislava, SI)
    Effect of frequency on the pulse electrolytic colouring process of aluminium

Session 3:

  1. Prof. Dr. Peter LEISNER (Acreo AB / Jönköping University, SE)
    Pulse reversal plating of hard chromium
  2. Frank MUNK (Munk GmbH, DE)
    Latest power supply developments
  3. Dr. Wolfgang E.G. HANSAL (Happy Plating, AT)
    Pulse Plating of pure tin layers

Session 4:

  1. Dr. Peter T. TANG (DTU, DK)
    Pulse Reversal Plating of Nickel Cobalt Alloys
  2. Prof. Dr. Magda LAKATOS VARSANYI (Bay Zoltan Foundation, HU)
    Pulse plated Nickel and Nickel-Cobalt layers
  3. Prof. Dr. Sudipta ROY (University of Newcastle, GB)
    Implementation of Pulse Plating for Optoelectronic Devices

Neben mehreren Posterbeiträgen waren wieder diverse relevante Fachfirmen mit einem Ausstellungsstand vertreten (in alphabetischer Reihenfolge):

  • a.c.k. aqua concept GmbH
    www.aquaconcept.de
    UV Reaktoren und Anlagen
  • Dynatronix
    www.dynatronix.com
    Amerikanischer Hersteller von Pulsgleichrichtern
  • Hirtenberger Engineered Surfaces GmbH
    www.happyplating.at
    Entwicklung, Prototypisierung und industrielle Umsetzung von Pulsabscheidungen und anderen Pulsprozessen
  • Ingenieurbüro Peter Schrems
    www.ips-jaissle.de
    Modulare Messtechnik für die Elektrochemie
  • L-Chem Inc.
    Hersteller von Cell-Design, der führenden Simulationssoftware zur Berechung und Optimierung elektrochemischer Prozesse. Vertrieb Europa: Hirtenberger Engineered Surfaces GmbH (www.happyplating.at)
  • Munk GmbH
    www.munk.de
    Deutscher Hersteller von Gleichstrom- und Pulsgleichrichtern
  • Plating Electronic
    www.plating.de
    Deutscher Hersteller einer breiten Palette von Pulsgleichrichtern

In addition several international posters were presented. Some relevant companies in the field of pulse plating were exhibiting their products (in alphabetical order):

  • a.c.k. aqua concept GmbH
    www.aquaconcept.de
    UV Reactors & Engineering for industrial use
  • Dynatronix
    www.dynatronix.com
    US producer of pulse rectifiers
  • Hirtenberger Engineered Surfaces GmbH
    www.happyplating.at
    Development, prototyping and industrial application of pulse plating and other pulsed processes
  • Ingenieurbüro Peter Schrems
    www.ips-jaissle.de
    Modular engineering for electrochemical measurement
  • L-Chem Inc.
    Inventor of Cell-Design, the leading simulation software for the calculation and optimisation of electrochemical processes. The distributing partner in Europe is Hirtenberger Engineered Surfaces GmbH (www.happyplating.at)
  • Munk GmbH
    www.munk.de
    German producer of DC- and pulse rectifiers
  • Plating Electronic
    www.plating.de
    German producer of a broad variety of pulse rectifiers

Fotos vom Event 2008:

Klicken Sie auf ein Bild um eine vergrößerte Darstellung zu erhalten.

Photos of the event 2008:

Click on a thumbnail for a larger image.

Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008 Pulse Plating Seminar 2008

Durch den anhaltend großen Erfolg und das sehr positive Feedback der Teilnehmer wird das Europäische Pulse Plating Seminar fortgesetzt. Der Termin soll mit der ersten Märzwoche beibehalten werden.

Due to the continuous great success and the very positive feedback of the participants the European Pulse Plating Seminar will continue. The first week of March will be kept as the date of the event.