Europäisches Pulse Plating Seminar
European Pulse Plating Seminar

Von den Grundlagen zur großtechnischen Anwendung
From fundamentals to industrial application

Hirtenberger Engineered Surfaces GmbH
Happy Plating

Das 4. Europäische Pulse-Plating Seminar am 05.03.2010 im Dachsaal der Wiener Urania war wieder ein großer Erfolg. Den Rahmen der Veranstaltung bildeten 13 internationale Fachvorträge von führenden Experten auf dem Gebiet der Pulsabscheidung. Die etwa 60 Teilnehmer führten in einer zwanglosen Atmosphäre eine offene Diskussion zu Fragen der industriellen Anwendung der Pulsabscheidung. Auch dieses Jahr nahmen Teilnehmer aus zahlreichen europäischen Ländern teil.

Wie auch in den vergangenen Jahren fanden im Anschluss an die Vorträge wieder angeregte Gespräche statt, welche schließlich bei einem typischen Wiener Heurigen fortgesetzt wurden.

The 4thEuropean Pulse-Plating Seminar on the 5th of March 2010 in the Dachsaal of the Vienna Urania was as successful as in the previous years. 13 international presentations of leading experts on pulse plating formed the framework of the conference. Approximately 60 participants joined a open discussion in a very relaxed atmosphere about questions regarding the industrial application of pulse plating. Again participants from numerous European countries attended the seminar this year.

As well as in the past years the lectures were followed by exciting discussions. After the seminar the discussions were continued in a more informal surrounding at a typical Viennese Heurigen.

Plenarvorträge / Plenary lectures

  1. Dr. Laszlo Peter (Hungarian Academy of Science, H)
    Application of pulse plating for codeposition of immiscible metals: Deposit properties and trends of the structure formation
  2. Prof. Dr. Magda Lakatos Varsanyi (Bay Zoltan Foundation, H)
    Pulse plating of antimicrobial silver nanocoatings
  3. Dr. Matilda Zemanova ( Slovak University of Technology, SK)
    Nickel pigmented alumina films
  4. Dr. Wolfgang E.G. Hansal (Happy Plating, A)
    Pulse plating of nickel-base alloys
  5. Dr. Sarah Ward-Jones (University of Bristol, GB)
    Alloys by precision electrodeposition
  6. Dr. Naroa Imaz Molina (CIDETEC, E)
    Mechanical and corrosion properties of double-layer nickel coatings obtained by pulse plating techniques
  7. Prof. Dr. Peter Leisner (SP Technical Research Institute of Sweden/Jönköping University, SE)
    Survey of pulse plating of copper from sulphuric acid solutions.
  8. Prof. Dr. Wolfgang Paatsch (BAM Berlin, D)
    Pulse plating in respect to hydrogen embrittlement
  9. Prof Dr. Peter Farr (University of Birmingham, GB)
    Electrode kinetics and the control of electroplating silver from cyanide solution
  10. Prof. Dr. Antonello Vicenzo (Politecnico di Milano, I)
    Morphology and grain size of pulse plated tin
  11. Prof. Dr. Wolfgang Kautek (Universität Wien, A)
    Pulse laser electrochemistry: a potential approach to micro pulse plating
  12. Prof. Dr. Sudipta Roy (University of Newcastle, GB)
    Mathematical models for pulse plating of alloys

Diverse relevante Fachfirmen waren mit einem Ausstellungsstand vertreten (in alphabetischer Reihenfolge):

  • Hirtenberger Engineered Surfaces GmbH
    www.happyplating.at
    Entwicklung, Prototypisierung und industrielle Umsetzung von Pulsabscheidungen und anderen Pulsprozessen
  • Ingenieurbüro Peter Schrems
    www.ips-jaissle.de
    Modulare Messtechnik für die Elektrochemie
  • L-Chem Inc.
    Hersteller von Cell-Design, der führenden Simulationssoftware zur Berechung und Optimierung elektrochemischer Prozesse. Vertrieb Europa: Hirtenberger Engineered Surfaces GmbH (www.happyplating.at)
  • Plating Electronic
    www.plating.de
    Deutscher Hersteller einer breiten Palette von Pulsgleichrichtern

Some relevant companies in the field of pulse plating were exhibiting their products (in alphabetical order):

  • Hirtenberger Engineered Surfaces GmbH
    www.happyplating.at
    Development, prototyping and industrial application of pulse plating and other pulsed processes
  • Ingenieurbüro Peter Schrems
    www.ips-jaissle.de
    Modular engineering for electrochemical measurement
  • L-Chem Inc.
    Inventor of Cell-Design, the leading simulation software for the calculation and optimisation of electrochemical processes. The distributing partner in Europe is Hirtenberger Engineered Surfaces GmbH (www.happyplating.at)
  • Plating Electronic
    www.plating.de
    German producer of a broad variety of pulse rectifiers

Fotos vom Event 2010:

Klicken Sie auf ein Bild um eine vergrößerte Darstellung zu erhalten.

Photos of the event 2010:

Click on a thumbnail for a larger image.

Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010 Pulse Plating Seminar 2010

Durch den anhaltend großen Erfolg und das sehr positive Feedback der Teilnehmer wird das Europäische Pulse Plating Seminar fortgesetzt. Der Termin soll mit der ersten Märzwoche beibehalten werden.

Due to the continuous great success and the very positive feedback of the participants the European Pulse Plating Seminar will continue. The first week of March will be kept as the date of the event.